Ve-200
VE-200 is a powerful water based undercoat for emulsion paints. It has very good adhesion, hardness and elasticity as well as great resistance to alkaline surfaces.
Ve-200 dries easily and insulates the surface. It provides a uniform mat surface to the finish coat. Its composition is similar to Vepal, thus providing better adhesion for the emulsion paint.
Surface Preparation – Application
Apply one coat of ASTARI VE-200 to properly prepared surfaces, using brush or roller. Surfaces must be clean, dry and free from all defective and poorly adhering material, dirt, grease and salts. Apply the material and let it dry at temperatures between 10°C to 35°C. Thin 1 part of Ve-200 with 4 parts of clean water.
After use
Remove as much paint as possible from brushes and rollers before cleaning. Clean brushes and equipment with water and detergent solution immediately after use.
PRODUCT INFORMATION | |
---|---|
Type | Water based undercoat. |
Specific gravity | 1,11 ± 0,02 gr/cm³ (ELOT 523) |
Viscosity | 7-10 ps (ROTOTHINNER DIN 51550, 25°C) |
Application method | Brush, roller. |
Thinning | 1 part of Ve-200 with 4 parts of clean water |
Spreading rates | About 35 – 45m²/Lt on a properly prepared surface. |
Drying time | Touch dry after 2 hours and recoatable after 3 hours. Drying time depends on weather conditions (humidity, temperature) |
Colors | It is available in white. |
VOC | EU limit value for this product (cat. Α/g): 50g/l (2007) and 30g/l (2010). This product contains max 1 g/l VOC. |
Packaging | per carton |
---|---|
0,75 Lt 3 Lt |
12 |