Language:
 

Vecryl for Concrete

Κατηγορίες: Paints for exterior walls

Tags: |

Vecryl for Concrete

Alcon Vecryl acrylic paint for Concrete

Vecryl for Concrete (Tsimentochroma) is an acrylic paint for exterior use with outstanding resistance to adverse weather conditions and longlasting durability.

It is suitable for every kind of new or old surface such as plaster and concrete surfaces. It has excellent working properties with great hiding power, strong adhesion and rapid drying. It gives a pleasing mat flat finish, which provides water resistant surfaces with high vapour permeability.

Surface preparation – Application

Surfaces must be clean, dry and free from all defective and poorly adhering materials, dirt, grease and salts. Prime with ASTARI VEDUR thinned up to 100% with White Spirit. After the preparation of the surface apply two coats of VECRYL. Apply the paint and let it dry at temperatures between 10°C to 35°C. Treatments such as sanding, burning off, etc. of paint films may generate hazardous dust and/or fumes. Work in well ventilated areas. Use suitable personal (respiratory) protective equipment, as necessary.

After use

Remove as much paint as possible from brushes and rollers before cleaning. Clean brushes and equipment with water and detergent solution immediately after use.

PRODUCT INFORMATION
Type 100% acrylic emulsion paint for concrete surfaces
Specific gravity 1,41 ± 0,02gr/cm3(ELOT 523)
Viscosity 11-14ps (ROTOTHINNER DIN 51550, 25°C)
Application method Brush, roller or airless spray
Thinning 5-10% clean water
Spreading rates About 12m² per litre on previously prepared surfaces
Drying times Touch dry after 1 hour and recoatable after 3 hours. Drying time depends on weather conditions (humidity, temperature)
Colours gray
Storage Store between 5o C to 40o C
VOC (Volatile Organic Compounds) EU limit value for VECRYL for concrete in category A/a: 75gr/l (2007) and 30 gr/l (2010). The ready to use product contains max 24gr/l VOC.
Packaging per carton
0,75 Lt
3 Lt
10 Lt
12