Velatura
VELATURA is an alkyd based undercoat ideal for use for ALCON’s enamel paint PROLUX. It is suitable for interior and exterior wooden surfaces and walls. It has high whiteness and hiding power and combines excellent levelling and working properties with very easy sanding.
Surface preparation – Application
Surfaces must be clean, dry and free from all defective and poorly adhering material, dirt and grease and be thoroughly rubbed down using a suitable abrasive paper. For wooden surfaces, first scrape all knots and then fill and coat all surface imperfections. For walls use the same putty to fill and coat the surfaces. After the preparation of the surface apply one or two coats of VELATURA. When it is completely dry sand with a suitable abrasive paper to give an even surface onto which the finish coat is applied. Treatments such as sanding, welding, burning off, etc. of paint films may generate hazardous dust and/or fumes. Work in well ventilated areas. Use suitable personal (respiratory) protective equipment, as necessary.
After use
Remove as much paint as possible from brushes and rollers before cleaning. Clean brushes and equipment with WHITE SPIRIT immed ately after use.
PRODUCT INFORMATION | |
---|---|
Type | Alkyd based undercoat for enamel paints. Lead free |
Application method | Brush, roller. |
Thinning | 5-15% v/v with WHITE SPIRIT |
Spreading rates | 10 -14m²/Lt on a properly prepared surface. |
Drying time | Touch dry after 15 – 45 min, dry after 4 – 5 hours, and recoatable after 12 – 14 hours. Drying time depends on weather conditions (humidity, temperature) |
Colors | It is available in white |
VOC | EU limit value for this product (category A/g): 450g/l (2007) and 350g/l (2010). This product contains max 455g/l. |
Packaging | per carton |
---|---|
0,75 Lt 2,5 Lt |
12 4 |