Hydrohroma (watercolor)
Hydrohroma (waterpaint): Waterpaint intended for indoors use. Great whiteness, coverage and resistance.
Hydrohroma is for interior use for ceilings, kitchens, bathrooms, storerooms and stairwells where it is not required resistance to washing surfaces. It is extremely white with great coverage, good performance, pleasant odor, allowing surfaces to breathe. Presents easy spreading without leaving roll traces and not bleaches once in contact with clothing.
Application instructions
Remove dilapidating parts, foreign bodies and dust. At firts, the surfaces must be primed with Ve-200, Ve-300 or Vedur, according to each primer’s instructions. Proplus is thinned with clean water, 5-15%, and applied in 1-2 coat using roller, brush or airless spray. Attention: To be applied between 5-30°C. Coated surfaces can be washed 20-30 days after application.The equipment should be cleaned with water and detergent.
Attention
To be applied between 5°C – 30°C. Coated surfaces can be washed 15-20 days after application.
PRODUCT INFORMATION | |
---|---|
Type | Waterpaint intended for indoors use |
Application method | Brush, roller or airless spray |
Thinning | 5-15% clean water |
Spreading rates | About 15-18 m² / Lt on previously prepared surfaces |
Drying time | Touch dry after 30-60 min, recoatable after 2-3 hours. |
Colors | It is available in white and thousands of shades. |
VOC | EU limit value for this product (category Α/a): 75 g/l (2007) and 30 g/l (2010). This product contains max 5 g/l VOC. |
Packaging | per Carton |
---|---|
3 Lt 9 Lt |